Solway's solar street light lamp heads can be replaced, but you need to pay attention to safety and compatibility issues. When replacing the lamp head, pay attention to the model matching, and the LED lamp head power shall not exceed 120% of the original design load.

Solway's solar street light heads can be replaced, but safety and compatibility issues need to be paid attention to. When replacing the head, pay attention to the model matching, and the power of the LED head should not exceed 120% of the original design load.

1. The feasibility of replacing street light heads

Replaceable: Street light heads are usually designed as detachable structures for easy replacement.

Notes:

Matchability: The power, voltage and installation size of the new head must match the original lamp pole and circuit.

Safety: The power must be turned off during replacement, and ladders or lifting equipment must be used for high-altitude operations. It is recommended that professionals operate.

Energy-saving upgrade: Consider replacing with LED head, which is energy-saving and has a long life.

1. Steps to replace street light heads

Power off: Make sure the power is turned off to avoid the risk of electric shock.

Remove the old head: Use tools (such as a wrench or screwdriver) to remove the screws or buckles that fix the head, and carefully remove the old head.

Check the line: Check whether the wires are intact. If damaged, repair them first.

Install the new lamp head: Connect the new lamp head to the wire (pay attention to the positive and negative poles), and then fix it with screws or clips.

Test: Turn on the power to test whether the new lamp head is working properly.

Clean up the site: Clean up tools and waste to ensure safety.

2. Precautions for replacing lamp heads

Matching specifications: The power, voltage and size of the new lamp head must match the original lamp pole and circuit.

Safety: Ladders or lifting equipment must be used for high-altitude operations, and safety equipment must be worn.

Professionalism: If you are not familiar with circuits or high-altitude operations, it is recommended to ask professionals to operate.

Energy-saving options: Consider replacing with LED lamp heads, which are energy-saving and have a long life.

3. Common reasons for replacing lamp heads

Lamp head damage: The bulb is burned out or the lamp head shell is cracked.

Technology upgrade: Upgrade from traditional high-pressure sodium lamps or halogen lamps to LED lamps.

Energy efficiency improvement: Replace with more energy-saving lamps to reduce electricity bills.

Aesthetic needs: Replace the lamp head to improve the appearance of street lights and adapt to urban landscape needs.

4. Advantages of LED lamp heads

Energy saving: 50%-70% energy saving compared to traditional lamps.

Long life: The service life can reach more than 50,000 hours, reducing the frequency of replacement.

High brightness: Provide better lighting effect.

Environmental protection: Does not contain harmful substances such as mercury, more environmentally friendly.

Summary

Street lamp heads can be replaced, and the operation is relatively simple, but attention should be paid to specification matching and safety. Replacing with LED lamp heads can not only improve the lighting effect, but also reduce energy consumption and maintenance costs. It is the preferred solution in modern municipal engineering. If you are not sure how to operate, it is recommended to contact a professional for replacement.